Wireless alarm system with GSM cellular backup(NO.:VS000129)

Introduction:

Wireless GSM alarm system is used to guard the area as well as property using GSM cellular technology. The main objective of GSM system fitted with the GSM module is to determine the fact of invasion to the controlled territory and to aware the owner by the phone or cell phone (send SMS).

The principle of GSM alarm system operation: protected area is equipped with all necessary sensors and control panel with the GSM module. Interaction between the sensors and control panel is being provided through the radio channel. In case of invasion of unauthorized person into the controlled territory one of the sensors triggers, the radio channel passes this information to the GSM module that activates and passes the alarm messages or calls to CMS (Central Monitoring Station) or  mobile phones of responsible for the protection of property person and to the property owner.

Main Features:

• Blue backup LCD display everything you want to know about the panel.
• Can program 6 Numbers, Support SMS (GSM) & Landline (PSTN) for alarm transmission.
• Full compliance with ADEMCO Contact ID.
• 85 event log for arming /disarming/ alarming (with date information), can check on LCD display.
• 12 seconds voice message, when alarm is triggered, it will automaticlly play the voice message after you pick up the phone.
• Any of the detecto can work as door bell when disarmed; any detector can be local siren when disarmed.
• Panel can receive the detector low voltage notification, and LCD display can show zone number and detector number.
• 7 hardwired zones, with 12V alarm output,  DC 12V power output (power supply for hardwired detectors).
• Support two way communication.
• Every remote can be set to request assistance siren on/off
• Siren could be set to sound when away arming
• Unique watchdog function, monitor the old, patient or important place.
• Built in rechargable battery;Built-in siren, and timer.

Technical Parameter:

Working voltage：100~240VAC
Operating power: 9-15VDC
GSM Frequency:900/1800MHZ, 850/900/1800/1900MHZ
Wireless Frequency:433MHZ
Static current: ≤ 80mA
Alarm current: ≤ 500mA
GSM transmission power: 2W
Operating environment: Temperature: -10-50; Humidity:90%
Hardwired Zone : 7
Wireless Zone: 8(Totally:51 sensor)

Standard Package:
- Security Alarm system (control unit) 1 pc.
- Wireless PIR detector 1 pc.
- Wireless door (gap) sensor 1 pc.
- Remote controller 2 pcs.
- Antenna 1pc.
- Power adpater 1pc.
- User manual 1pc.

Warranty Information
12 months