RP205CN produced using the latest technology, LSI application, SMT welding technology, digital programming, the protection of the system reliability and stability. Design a small, beautiful, rational layout.
| Technical Specification |
|
LCD Keyboard
|
English/Chinese
|
|
Own emergency Standoff (button):
|
Robbery [1] + [2], fire [4] + [5], medical alarm [7] + [8]
|
| Stand-terminal characteristics | normally closed, normally open, single termination resistor |
|
Current motherboard
|
70mA
|
| Memory | 50 incident records; 8 Group 4 classification code |
|
Lock switch output current
|
250mA
|
| Peripherals | with a voice module; remote dismantling / deployment; motherboard standoff any programmable output port for the switch lock. |
| Digital Voice Module RV200 | 1 voice message, 20S; can specify all the following telephone |
| Defense zone wireless expansion module EW8 | Wireless Expansion Module; Superheterodyne technology; Programmable time monitoring; Lack of low power transmitter monitoring; Transmitter tamper monitoring; Interference signal instructions; Support for wireless detector; Cycle of code. EPS power supply output expansion module; 4-wire system through the four modules can be connected; To other modules and alarm 1.5A12V power supply; A comprehensive monitoring power supply, including batteries, AC power supply, alarm and auxiliary power supply output circuit; built-in alarm drive; tamper monitoring; has a power-down memory function. |
| Timing | Auto-day deployment; automatic test reports during the day and installation; All the expansion modules via 4-wire system with the system; host module with a range of up to 300 meters. |
| Monitoring | Fault state can be displayed on the keyboard can also be transmitted to the monitoring station; Lack of battery backup power; Power extension insufficient battery power; Alarm circuit fault; alarm expansion module power supply failure alarm circuit; Telephone line fault; AC power expansion of insufficient power supply module; Lack of auxiliary power supply; Auxiliary power supply extension power failure; System clock is not set; Stand-anti-shear; Fire circuit fault. Electric Specifications; Transformer 16.5VAC40VA; Backup battery 12V4AH; Auxiliary power supply 350mA; Lock switch 250mA; Alarm 750mA; Motherboard comes with seven kinds of fire alarm sound drivers; 4 to connect the expansion board 1.5V12A power; Motherboard comes with a programmable open collector output 70mA; 24 3A to connect the C-programmable relay output; Programmable loop response time for 10mS, 500mS, or 1S; Host module with a range of up to 300 meters |
Goods comment